PVC Pipe Fittings Elbow Tee Water Supply And Drainage Pipe Plastic Fitting 50 75 110
----------------------------------------
Basic Info.
UPVC, also known as hard PVC or PVCU, is composed of an amorphous thermoplastic resin made by the polymerization of vinyl chloride monomer and certain additives (such as stabilizers, lubricants, fillers, etc.). In addition to the use of additives, the method of blending with other resins is also used to make it have obvious practical value. These resins include CPVC, PE, ABS, EVA, MBS, etc. UPVC has high melt viscosity and poor fluidity. Even if the injection pressure and melt temperature are increased, the fluidity will not change much. In addition, the molding temperature of the resin is very close to the thermal decomposition temperature, and the temperature range that can be molded is very narrow, making it a difficult-to-mold material.
| DN.mm | Wall thickness(mm) | |||||
| 0.63 M pa | 0.8Mpa | l.OMpa | 1.25Mpa | 1.6Mpa | 2.0Mpa | |
| 20 | - | - | - | - | 2.0 | 2.0 |
| 25 | - | - | - | - | 2.0 | 2.0 |
| 32 | - | - | - | - | 2.0 | 2.0 |
| 40 | - | - | - | - | 2.0 | 2.0 |
| 50 | - | - | - | - | 2.0 | 2.4 |
| 50 | - | - | - | 2.0 | 2.4 | 3.0 |
| 63 | - | - | 2.0 | 2.5 | 3.0 | 3.8 |
| 75 | - | 2.0 | 2.3 | 2.9 | 3.6 | 4.5 |
| 90 | 2.0 | 2.2 | 2.8 | 3.5 | 4.3 | 6.5 |
| 110 | 2.2 | 2.7 | 3.4 | 4.2 | 5.3 | 6.6 |
| 125 | 2.5 | 3.1 | 3.9 | 4.8 | 6.0 | 7.4 |
| 140 | 2.8 | 3.5 | 4.3 | 5.4 | 6.7 | 8.3 |
| 160 | 3.2 | 4.0 | 4.9 | 6.2 | 7.7 | 9.5 |
| 180 | 3.6 | 4.4 | 5.5 | 6.9 | 8.6 | 10.7 |
| 200 | 3.9 | 4.9 | 6.2 | 7.7 | 9.6 | 11.9 |
| 225 | 4.4 | 5.5 | 6.9 | 8.6 | 10.8 | 13.4 |
| 250 | 4.9 | 6.2 | 7.7 | 9.6 | 11.9 | 14.8 |
| 280 | 5.5 | 6.9 | 8.6 | 10.7 | 13.4 | 16.6 |
| 315 | 6.2 | 7.7 | 9.7 | 12.1 | 15.0 | 18.7 |
| 355 | 7.0 | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 |
| 400 | 7.9 | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 |
| 450 | 8.8 | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 |
| 500 | 8.9 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 |
| 560 | 11.0 | 13.7 | 17.2 | 21.4 | 26.7 | 33.2 |
| 630 | 12.3 | 15.4 | 19.3 | 24.1 | 30.0 | 37.4 |
Advantage
1. Lightweight, convenient for handling and loading and unloading:
The material of PVC pipe is very light, it is convenient to carry and construct, and it can save labor.
2. Excellent chemical resistance
PVC pipe has excellent acid resistance, alkali resistance, and corrosion resistance, which is very suitable for the chemical industry.
3. Small fluid resistance
The wall surface of the PVC pipe is smooth, and its resistance to fluid is small. Its roughness coefficient is only 0.009, which is lower than other pipe materials. Under the same flow rate, the pipe diameter can be reduced.
4. High mechanical strength
The water pressure resistance, external pressure resistance and impact resistance of PVC pipes are all very good, and it is suitable for piping projects under various conditions.
5. Good electrical insulation
PVC pipes have excellent electrical insulation properties and are suitable for conduits for wires and cables, and wire piping in buildings.
6. Does not affect water quality
The dissolution test proves that the PVC pipe does not affect the water quality, and it is the best pipe material for tap water piping at present.
7. Easy construction
The joint construction between PVC pipes is quick and easy, so the construction engineering cost is low.
Details
Application
1. Saw pipe and bevel:
The length of the saw pipe is determined layer by layer according to actual measurement and combined with the size of each connecting pipe. Saw pipe tools should use fine-tooth saws, cutters, pipe cutters and other tools. The fracture should be flat and there should be no deformation at the cross section. The part of the socket to be bonded can be filed into a 15o~30o groove with a medium plate file. The groove length is generally not less than 3mm, and the groove thickness should be 1/3~1/2 of the pipe wall thickness. After the bevel is completed, the debris should be removed.
2. Protection of socket interface:
After connecting the socket interface, wipe the extruded adhesive with cotton yarn or a dry cloth dipped in a little acetone and other cleaning agents. According to the performance of the adhesive and the weather conditions, let it sit until the interface is cured. The curing time should be appropriately extended during winter construction.
Certificate
Company Profile
High Mountain Pipe is a well-known PVC pipe manufacturer and wholesaler in Jiangsu. It produces multi-caliber HDPE pipes, pvc pipes, pvc hoses and accessories and supporting machines. The products are widely used. It is the first choice for watering and irrigation of agricultural and forestry breeding gardens. The pipeline is An essential transmission tool for industrial, agricultural, and construction engineering drainage cleaning. Complete specifications, can be customized according to customer needs, use quality to create a brand, and use service to win trust.
The company adheres to the people-oriented scientific development concept, correctly grasps product development trends, implements strategic target management, is committed to developing core manufacturing advantages, optimizing resource allocation and technological breakthroughs, introducing market-oriented and refined operating systems, achieving leapfrog development, and striving to build " "Rongchengxing" brand, implement a win-win strategy, and work hard for the development of the industry!
FAQ
Q: How to get free samples?
A: Send your address, telephone number, zip code and express account number to our mailbox, and tell us which model of samples you need. Our sales team will contact you within 24 hours.
Q: Where is your company?
A: We are located in Jiangsu, China.
Q: Is the price on this page correct?
A: The listed prices are for reference only, please contact us directly for the latest prices.
