PPR Water Pipe 20/25/50 Hot Melt Thickened 1 Inch Water Pipe Gray Water Supply And Drainage
----------------------------------------
Basic Info.
1. PPR pipes and fittings are connected by hot melt, but they cannot be threaded directly on the pipes and fittings. Flange connection can be used when connecting with metal pipes, and pipe fittings with metal inserts must be used when connecting with water heaters. ;
2. In the process of hot-melt connection, you must use reliable hot-melt equipment, which can ensure the quality of welding;
3. When using special scissors to cut PPR pipe vertically, ensure that the cut is kept flat and free of burrs;
4. The welding parts of PPR pipes and fittings must be clean to prevent sand and dust from damaging the quality of the joints;
5. When inserting in welding, the equipment must be heated according to the specified time for pipes and fittings;
6. After the heating is completed, immediately take out the pipes and fittings and connect them. If you find that these two positions are wrong, then you can make corresponding adjustments in a certain period of time;
7. After the connection of the agent PPR pipes, you must hold the pipes and fittings with both hands to maintain sufficient cooling time. When the cooling reaches a certain level, you can let go and continue to install the pipes. The white PPR pipes should be colored on the wall or the ground after the connection is completed Paint the specific location of the pipeline to avoid damage to the pipe again.
| DN | EN | 20℃ Pressure | Temperature range |
| 20mm | 2.8mm | 2.0Mpa | ﹣30~110℃ |
| 3.4mm | 2.5Mpa | ||
| 25mm | 3.5mm | 2.0Mpa | |
| 4.2mm | 2.5Mpa | ||
| 30mm | 4.3mm | 2.0Mpa | |
| 5.6mm | 2.5Mpa | ||
| 35mm | 5.6mm | 2.0Mpa | |
| 6.2mm | 2.5Mpa | ||
| 50mm | 7.3mm | 2.0Mpa | |
| 7.8mm | 2.5Mpa | ||
| 60mm | 8.0mm | 2.0Mpa | |
| 8.5mm | 2.5Mpa |
Advantage
1. Sanitary and non-toxic: All parts of the piping system composed of PP-R pipes and fittings can be completely non-toxic, and the sanitary indicators meet the requirements of the GB/T17219 standard.
2. No corrosion: It can withstand the corrosion of high concentrations of acid and alkali in the range of 1 to 14 with PH value in a wide temperature range.
3. Wear-resistant and non-scaling: The inner wall of PP-R pipe and pipe fittings is uniform and smooth, with low flow resistance and no scaling.
4. Reduce vibration and noise: PP-R pipe has excellent sound insulation performance, which can significantly reduce vibration and noise caused by liquid flow.
5. Anti-freeze cracking: PP-R material has excellent elasticity so that the pipes and pipe sections can expand with the frost heaving liquid without bursting and cracking.
6. Anti-condensation, low heat loss: PP-R material is a poor heat conductor, which can reduce condensation and reduce heat loss.
7. Anti-electric corrosion: PP-R material is a poor conductor, which can avoid electric corrosion.
8. Simple installation: light weight, convenient installation and operation, and solderability.
9. Large cross-sectional area of the pipe fittings: The inner diameter of the PP-R pipe fittings is slightly larger than the inner diameter of the connected pipes, which can ensure that the fluid does not increase the flow resistance in the pipe fittings.
10. Recyclable: PP-R pipes and fittings can be recycled and reused.
11. Long service life: The pipe system has a service life of up to 50 years under the specified conditions of use.
Details
Application
1. Hot and cold drinking water pipe system
2. Industrial fluid conveying system
3. Supply pipeline system in seaside facilities
4. Air conditioning system
5. Agricultural irrigation system
6. Internal piping system of transportation vehicles
Certificate
Company Profile
Located in Jiangsu, with convenient water and land transportation. It is a comprehensive enterprise integrating research, development, design, application, production and sales. The company has production lines for PE water supply pipes with larger diameters, prestressed corrugated pipes, corrugated pipe production lines, PVC pipe production lines and other equipment. Specializing in the production of PE water supply pipes, prestressed corrugated pipes, HDPE corrugated pipes, plastic blind trenches, permeable pipes, etc. The products are mainly used in municipal administration, highways, railways, water conservancy, power, environmental greening and infrastructure construction, and are used in municipalities and expressways. Many national key projects such as railways and railways have been well received by engineering experts and users.
The company analyzes the lifestyle and aesthetic trends of modern people, integrates the concept of excellent pipeline home culture, and relies on the industry-leading integrated system of R&D, design, production, installation, and service to develop a one-stop personalized customized pipeline system solution. Provide optimized, cost-effective health products for thousands of families.
FAQ
Q: After reading your FAQ, I am very satisfied. How can I start buying my order?
A: Please contact our sales manager by email or phone, thank you.
Q: What is the purpose of this pipeline?
A: It is mainly used to transport liquids, and is used on a large scale in urban water supply projects, farmland irrigation, etc.
Q: What certificates do you have for this product?
A: ISO, CE, SGS, etc.
