Ductile Iron Pipe K9K7 Black Ductile Pipe DN200 300 Water Supply And Drainage Fire Protection Engineering
Features: high elongation, impact resistance, corrosion resistance
Category: pipe fittings
Scope of application: water supply industry, drainage industry, sewage industry
|Diameter(mm)||Outer diameter(mm)||Wall thickness
Strong corrosion resistance, good pressure and bending resistance, convenient joints, water flow, no odor, no harm to health, etc.
1. Trench excavation
The width of the groove bottom should be calculated as follows: B=D1+2(b1+b2)
Where: B—the width of excavation at the bottom of the pipeline trench (mm) D1—the width of the outer edge of the pipeline structure (mm) b1—the width of the working surface on one side of the pipeline (mm) b2—the width of the support on one side of the pipeline (mm)
2. Groove support
According to the trench soil quality, groundwater, slotted section, load conditions and other factors, the design is required to be firm and reliable, to prevent collapse, and the support shall not hinder the down pipe and the stable pipe.
3. The buttress shall be provided at the turning point of the T-shaped joint pipeline in the vertical or horizontal direction. The size of buttress should be determined by calculation according to factors such as pipe diameter, rotation angle, working pressure, etc.
4. When transporting drinking water, the pipeline should not pass through the poisonous contaminated area. If it must pass, protective measures should be taken.
5. All the ductile iron pipelines connected by sockets must be provided with buttresses after calculation. Refer to the National Building Standard Design Atlas 03SS505 "Flexible Joint Water Supply Pipeline Buttress".
6. The outer anti-corrosion coating of ductile iron pipes should be galvanized and epoxy asphalt coatings or coatings with higher requirements according to the soil conditions of the pipe application site.
7. After the pipeline is installed and the pressure test is qualified, it should be rinsed with low chloride ion water and disinfected with 0.03% potassium permanganate aqueous solution.
Our company's products are of high quality, and we always adhere to and implement the quality policy of "Quality is the foundation of a company's survival, and providing users with satisfactory products and services is our eternal pursuit". . Our company is a factory direct sale of ductile iron pipes, ductile iron pipe fittings, ductile iron manhole covers, Xinxing ductile pipes, ductile iron well grate; W type flexible cast iron pipe, W type cast iron drainage pipe and pipe fittings; A type flexible cast iron pipe, A type cast iron drainage Pipes and fittings, B-type flexible cast iron pipes, B-type cast iron drainage pipes and pipe fittings and other products. Our company is a group company integrating production and sales. The annual production capacity of ductile iron pipes and flexible drainage pipes is 300,000 tons; the annual sales volume of ductile iron pipes is 120,000 tons and the annual sales volume of flexible drainage pipes is 180,000 tons.
Q: Which payment method can your company use?
A: T/T, L/C or full trade insurance. You can choose the one that is convenient for you.
Q: Is it possible to use the label or packaging I specified?
A: Yes. If necessary, we would like to use labels or packaging according to your requirements.
Q: How do you guarantee that the products you provide are qualified?
A: We always believe that integrity and responsibility are the foundation of a company, so any products we provide you are qualified. We will test the goods and provide COA before delivery.
|Tel :||+86 15052152041|