PE100 Hdpe Water Supply Pipes 630mm PN8 PN10 SDR 17 For Water System
PE pipes for water supply are the replacement products of traditional steel pipes and PVC drinking water pipes.
The water supply pipe must bear a certain pressure, usually a PE resin with a large molecular weight and good mechanical properties, such as HDPE resin, should be used. LDPE resin has low tensile strength, differential pressure resistance, poor rigidity, poor dimensional stability during molding and difficult connection, and is not suitable as a material for water supply pressure pipes. However, due to its high hygienic index, LDPE, especially LLDPE resin, has become a common material for the production of drinking water pipes. LDPE and LLDPE resins have low melt viscosity, good fluidity, and easy processing, so their melt index can be selected in a wide range, usually MI is between 0.3-3g/10min.
|Pressure 0.6Mpa||Pressure 0.8Mpa||Pressure 1.0Mpa||Pressure 1.25Mpa||Pressure 1.6Mpa|
|Outer diameter mm||Thick mm||Outer diameter mm||Thick mm||Outer diameter mm||Thick mm||Outer diameter mm||Thick mm||Outer diameter mm||Thick mm|
1. Excellent corrosion resistance, better hygiene performance and longer service life
2. Unique flexibility and excellent scratch resistance
3. Very outstanding low temperature resistance
4. Good fracture toughness with rapid crack growth
The materials used in HDPE pipes are mainly polyvinyl chloride (PVC), polyethylene (PE) and polypropylene (PP). Compared with other plastic pipes (such as PVC), high-density polyethylene (HDPE) pipes have the characteristics of low density, good toughness, corrosion resistance, good insulation performance, easy construction and installation, and are widely used in municipal and building water supply and drainage, gas , heating and heating, wire and cable threading, agricultural water-saving irrigation and other fields.
High Mountain Pipe main plastic pipe products are: dn20-dn160mm polypropylene (PP-R) pipes for cold and hot water, dn20-dn450mm polyethylene (PE) pipes for water and gas, dn50-dn200 polyethylene (HDPE) silent drainage pipes, dn50- The dn200mm polypropylene (HTPP) high-temperature silent drainage pipe has more than 600 types of matching pipe fittings, and the completeness of pipe fittings is among the best in the domestic industry. Products comply with German industrial standards DIN8077, DIN8078; Chinese national standards GB/T18742, GB/T13663, GB15558; international standards ISO/15874, ISO7671 and corporate standards Q/VAPW1, Q/VAPW2 and other standards. ISO9001: 2008 quality management system covers the entire production and testing process.
As a domestic professional manufacturer of plastic pipes and molds, the company takes serving the society as its own responsibility, is committed to the research and development of new green environmental protection pipes, and pursues sustainable development. The company not only contributes high-tech and high-quality products to the society, but also provides comprehensive after-sales service and technical guidance. The company takes green building materials as the starting point to meet the ever-increasing consumer demand and quality of life of the public.
Q: How to buy products?
A: Send an email to us and we will get back to you within one day.
Q: Which payment method can your company use?
A: T/T, L/C or full trade insurance. You can choose the one that is convenient for you.
Q: How and when can I receive my goods after payment?
A: For small batch products, they will be delivered to you by international express (DHL, FedEx, TNT, etc.) or by air. It usually takes 3-5 days to receive the goods after delivery. For high-volume products, it is worthwhile to see the goods and deliver them. It takes several days to several weeks to reach the destination port, depending on the location of the port.
|Contact Person :||Karl Shen|