Manufactory China Pipes Plastic Agriculture 2.5 Inch 110mm 160mm Pvc For Drainage And Sewer Upvc Pipe For Water Supply
UPVC pipe is a plastic pipe made of polyvinyl chloride (PVC) resin without plasticizer. With the development of chemical industry technology, non-toxic grade pipes can now be produced, so it has the performance of general polyvinyl chloride and adds some excellent performance. Specifically, it has the advantages of good corrosion resistance and softness, so Especially suitable for water supply network. Because it is non-conductive, it is not easy to electrochemically react with acids, alkalis and salts, and it is difficult for acids, alkalis and salts to corrode it, so external anti-corrosion coatings and linings are not required. The flexibility is good, which overcomes the shortcomings of the brittleness of plastic pipes in the past, and can yield without breaking under load.
|Wall Thick Ness(mm)||Wall Thick Ness(mm)||Wall Thick Ness(mm)||Wall Thick Ness(mm)||Wall Thick Ness(mm)||Wall Thick Ness(mm)||Wall Thick Ness(mm)|
The inner wall of the U-PVC pipe is smooth and the resistance is small (the resistance coefficient of the UPVC pipe is 0.009, while the resistance coefficient of the general galvanized pipe. The resistance coefficient of the cast iron pipe is 0.012-0.013), so it is obvious that the hydraulic conditions are good. When the same liquid is transported by pipes of the same diameter, the resistance of UPVC pipes is about 30% smaller than that of galvanized pipes and cast iron pipes; when the water head loss is the same, the water transport capacity of UPVC pipes is more than 20% larger than that of cast iron pipes. Since the inner wall of the UPVC pipe is smooth, the liquid will not be scaled when flowing inside, so its conveying capacity will not decrease with the increase of operating time. And this is the insurmountable disadvantage of galvanized pipes and cast iron pipes.
There are many UPVC, and it has the characteristics of higher ignition point, low combustion smoke, low electrical conductivity and higher wear resistance, so it is a good material for industrial pipes. Both UPVC and CPVC piping systems have the characteristics of impact resistance, not easy to deform, smooth inner wall, not easy to scale, good thermal insulation performance, convenient for cold glue bonding, and long service life, so the advantages of cost performance and low construction cost have gradually increased. It can replace the piping system of other metal materials, and the maintenance of UPVC and CPVC pipes is convenient and quick, and there is no need to stop for a long time for maintenance and cause huge losses. Therefore, UPVC and CPVC piping systems are the first choice for current industrial piping design. The allowable working temperature of UPVC piping system is 0-60 degrees. It is suitable for transporting some corrosive chemical fluids with a temperature below 45 degrees. It can also be used for the transportation of pressure fluids such as non-drinking water. It is generally suitable for use in water outlet pipes, environmental Engineering piping, air conditioning piping and vacuum clean room piping.
High Mountain Pipe is a modern emerging enterprise integrating scientific research, development, production and sales. It also sells plumbing equipment from other well-known domestic manufacturers, and its business scope covers various overseas countries and cities.
The company will adhere to the corporate tenet of "survive by quality, develop by service", "abide by contract and respect reputation", and take "integrity, pragmatism, pioneering and enterprising" as its business philosophy to provide you with excellent products and services. Hope to establish long-term friendly cooperative relations with customers from all over the world. Go hand in hand, mutual benefit and create brilliance together.
The company adheres to the belief of "integrity first, mutual benefit, and efficient development", based on the present and focusing on the future. Warmly welcome new and old customers, guests and friends from all walks of life to patronize, consult and guide, work together to create brilliant.
Q: How and when can I receive my goods after payment?
A: For small batch products, they will be delivered to you by international express (DHL, FedEx, TNT, etc.) or by air. It usually takes 3-5 days to receive the goods after delivery. For high-volume products, it is worthwhile to see the goods and deliver them. It takes several days to several weeks to reach the destination port, depending on the location of the port.
Q: What is the purpose of this pipeline?
A: It is mainly used to transport liquids, and is used on a large scale in urban water supply projects, farmland irrigation, etc.
Q: What certificates do you have for this product?
A: ISO, CE, SGS, etc.
|Tel :||+86 15052152041|